UGen abstract superclass of all unit generators
Inherits from: Object : AbstractFunction
UGens represent calculations with signals. They are the basic building blocks of synth definitions on the server, and are used to generate or process both audio and control signals. The many subclasses of UGen are the client-side representations of unit generators, and are used to specify their parameters when constructing synth definitions (see SynthDef).
See also: UGens, Tour_of_UGens, and UGens-and-Synths.
Class Methods
*ar(arg1, arg2, ... )
*kr(arg1, arg2, ... )
*ir(arg1, arg2, ... )
Return a new instance of UGen that calculates at audio/control rate or at initialization only (ir). Some UGens, like Rand, use the *new method instead. These methods are implemented in subclasses, where argument names and their meaning depend on the case. If any argument is an array, they return an array of UGens (see: MultiChannelExpansion). If the combination of rates between arguments and ugen are not allowed, calling the methods will throw an error. This method adds the UGen to the current SynthDef, so it only fully works inside a UGen function.
{ Blip.ar(Blip.kr(4, 5, 500, 60), 59, 0.1) }.play;
*buildSynthDef
Return the SynthDef in which the UGen is situated.
{ UGen.buildSynthDef.dump; Silent.ar }.play;
Note: For internally used class methods, see below.
Documentation of mul and add arguments
A great number of UGens take arguments for mul and add in their *ar and *kr methods. Because these arguments are so ubiquitous, they are not general documented in the individual help files. Mul and add simply refer to a constant or signal by which to multiply the output of the UGen, and a constant or signal to add to the output of the UGen. (mul happens before add.) They thus correspond in many cases to scaling the amplitude of the UGen signal in the case of mul, and adding a constant or DC offset in the case of add. In most cases the defaults for mul and add are 1 and 0 respectively, and they are commonly implemented using a automatically generated MulAdd UGen for efficiency. See also the range and madd methods below.
Convenience Methods
scope(name, bufsize, zoom)
Displays the output of this UGen in an individual Stethoscope window. name is the name of the window.
Server.default = s = Server.internal.boot; // scope works only for internal server
{ Ringz.ar(PinkNoise.ar([0.1, 0.2]).scope(\pink), 2000, 1, 0.25) }.play; // multichannel works
s.scope; // can still separately scope the output of the server
Server.default = s = Server.local.boot; // switch back to local server.
poll(trig, label, trigid)
Polls the output of this UGen every interval seconds, and posts the result. The default trig is 10, which converts to 10 triggers per second (or every 0.1 seconds). See Poll for more info on polling.
{ SinOsc.ar(LFNoise0.ar(2).range(420, 460).poll(label: \LFNoise), 0, 0.2) }.play;
// multichannel polling:
(
{
var freqs = SinOsc.ar([0.2, 0.3]).range(420, 460);
freqs.poll(label: [\freq1, \freq2]);
SinOsc.ar(freqs, 0, 0.2);
}.play;
)
dpoll(trig, label, trigid)
Like poll, only that dpoll is used for Demand ugens. See Poll for more info on polling.
range(lo, hi)
Scales the output of this UGen to be within the range of lo and hi. Note that 'range' expects the default output range, and thus should not be used in conjunction with mul and add arguments.
{ SinOsc.ar(SinOsc.ar(0.3).range(440, 660), 0, 0.5) * 0.1 }.play;
exprange(lo, hi)
Maps the output of this UGen exponentially to be within the range of lo and hi using a LinExp UGen. lo and hi should both be non-zero and have the same sign. Note that 'exprange' expects the default output range, and thus should not be used in conjunction with mul and add arguments.
{ SinOsc.ar(SinOsc.ar(0.3).exprange(440, 6600), 0, 0.5) * 0.1 }.play;
unipolar(mul)
Scales the output of this UGen to be between (0..mul) range (default 1). Note that 'unipolar' expects the default output range, and thus should not be used in conjunction with mul and add arguments.
{ SinOsc.ar(300, 0, 0.5) * SinOsc.kr(2).unipolar * 0.1 }.play;
bipolar(mul)
Scales the output of this UGen to be between (-mul..mul) range (default 1). Note that 'bipolar' expects the default output range, and thus should not be used in conjunction with mul and add arguments.
{ SinOsc.ar(500 + LFPulse.ar(4).bipolar(40), 0, 0.5) * 0.1 }.play;
clip(lo, hi)
Wraps the receiver in a Clip UGen, clipping its output at lo and hi.
fold(lo, hi)
Wraps the receiver in a Fold UGen, folding its output at lo and hi.
wrap(lo, hi)
Wraps the receiver in a Wrap UGen, wrapping its output at lo and hi.
lag(lagTime, t2)
Wraps the receiver in a Lag UGen, smoothing its output by lagTime. If a second argument is given, it wraps it in a LagUD UGen. Default lag time: 0.1.
lag2(lagTime, t2)
Wraps the receiver in a Lag2 UGen, smoothing its output by lagTime. If a second argument is given, it wraps it in a Lag2UD UGen. Default lag time: 0.1.
lag3(lagTime, t2)
Wraps the receiver in a Lag3 UGen, smoothing its output by lagTime. If a second argument is given, it wraps it in a Lag3UD UGen. Default lag time: 0.1.
lagud(lagTimeU, lagTimeD)
Wraps the receiver in a LagUD UGen, smoothing its output by lagtimeU and lagtimeD. Default lag time: 0.1.
lag2ud(lagtimeU,lagtimeD)
Wraps the receiver in a Lag2UD UGen, smoothing its output by lagtimeU and lagtimeD. Default lag time: 0.1.
lag3ud(lagtimeU, lagtimeD)
Wraps the receiver in a Lag3UD UGen, smoothing its output by lagtimeU and lagtimeD. Default lag time: 0.1.
degreeToKey(scale, stepsPerOctave)
Wraps the receiver in a DegreeToKey UGen. The default stepsPerOctave is 12.
minNyquist
Wraps the receiver in a min UGen, such that the lesser of the receiver's output and the Nyquist frequency is output. This can be useful to prevent aliasing.
linlin(inMin, inMax, outMin, outMax, clip)
Wraps the receiver so that a linear inputrange is mapped to a linear output range.
The clip argument can be one of the four:
nil (do not clip at outMin or outMax),
\minmax (clip at outMin or outMax),
\min (clip at outMin),
\max (clip at outMax)
{ Line.ar(-1, 5, 0.1).linlin(0, 3, -1, 1) }.plot(0.1);
// modulate some values
(
{ Line.ar(-1, 5, 0.1).lincurve(SinOsc.ar(100), SinOsc.ar(130) + 3, -1, 1, clip: nil) }
.plot(0.1, minval: -15, maxval: 5)
)
linexp(inMin, inMax, outMin, outMax, clip)
Wraps the receiver so that a linear inputrange is mapped to an exponential output range.
outMin and outMax must be nonzero and of the same sign. For clip argument, see linlin.
{ Line.ar(-1, 5, 0.1).linexp(0, 3, 0.01, 1) }.plot(0.1);
explin(inMin, inMax, outMin, outMax, clip)
Wraps the receiver so that an exponential inputrange is mapped to a linear output range.
inMin and inMax must be nonzero and of the same sign. For clip argument, see linlin.
{ Line.ar(1, 5, 0.1).explin(1, 3, -1, 1) }.plot(0.1);
expexp(inMin, inMax, outMin, outMax, clip)
Wraps the receiver so that an exponential inputrange is mapped to an exponential output range.
outMin, outMax, inMin and inMax must be nonzero and of the same sign. For clip argument, see linlin.
{ Line.ar(1, 5, 0.1).expexp(1, 3, 0.01, 1) }.plot(0.1);
lincurve(inMin, inMax, outMin, outMax, curve, clip)
Wraps the receiver so that a linear inputrange is mapped to a curve-like exponential output range.
outMin and outMax may be zero and of the different sign. For clip argument, see linlin.
{ Line.ar(-1, 5, 0.1).lincurve(0, 3, -1, 1, curve: -4) }.plot(0.1);
// modulate the curve. Unlike with numbers and CurveSpec, the curve absolute value
// should not be much smaller than 0.5.
{ SinOsc.ar(100).lincurve(-1, 1, -1, 1, XLine.kr(-3, -100, 0.1)) * 0.1 }.plot(0.1);
curvelin(inMin, inMax, outMin, outMax, curve, clip)
Wraps the receiver so that a curve-like exponential inputrange is mapped to a linear output range.
inMin and inMax may be zero and of the different sign. For clip argument, see linlin.
{ Line.ar(-1, 5, 0.1).curvelin(0, 3, -1, 1, curve: -4) }.plot(0.1);
prune(min, max, clip)
Limits the receiver range to one of the four clip modes (see linlin)
checkBadValues(id, post)
Wraps the receiver in a CheckBadValues UGen with the corresponding id and post flag.
if(trueUGen, falseUGen)
Outputs trueUGen when the receiver outputs 1, falseUGen when the receiver outputs 0. If the receiver outputs a value between 0 and 1, a mixture of both will be played. (This is implemented as: ^(this * (trueUGen - falseUGen)) + falseUGen) Note that both trueUGen and falseUGen will be calculated regardless of whether they are output, so this may not be the most efficient approach.
// note different syntax in these two examples
{ if( LFNoise1.kr(1.0, 0.5, 0.5) , SinOsc.ar, Saw.ar ) * 0.1 }.play;
{ Trig1.ar(Dust.ar(3), 0.2).lag(0.1).if(FSinOsc.ar(440), FSinOsc.ar(880)) * 0.1 }.play;
@ y
Dynamic geometry support. Returns Point(this, y).
{ (SinOsc.ar(1001) @ SinOsc.ar(1207)).rho }.scope;
asComplex
Complex math support. Returns Complex(this, 0.0).
dumpArgs
Posts a list of the arguments for this UGen and their values.
Other Instance Methods
The following methods and instance variables are largely used in the construction of synth definitions, synth descriptions (see SynthDesc), UGen class definitions, etc., and are usually not needed for general use. Users should not attempt to set any of these values in general code.
synthDef
The SynthDef which contains the UGen.
inputs
The array of inputs to the UGen.
rate
The output rate of the UGen which is one of the Symbols 'audio', or 'control'.
signalRange
Returns a symbol indicating the signal range of the receiver. Either \bipolar or \unipolar.
numChannels
Returns the number of output Channels. For a UGen, this will always be 1, but Array also implements this method, so multichannel expansion is supported. See MultiChannel.
numInputs
Returns the number of inputs for this UGen.
numOutputs
Returns the number of outputs for this UGen.
name
Returns the Class name of the receiver as a String.
madd(mul, add)
Wraps the receiver in a MulAdd UGen. This is for the most part only used in UGen class definitions in order to allow efficient implementation of mul and add arguments.
isValidUGenInput
Returns true.
asUGenInput
Returns the receiver. This method is implemented in a number of classes in order to allow objects like Nodes, Busses, and Buffers to be passed directly as UGen inputs and Synth args.
copy
Returns the receiver. Thus UGen-dup effectively returns a reference to the original and is a convenient way to copy a mono signal to multiple channels.
{ SinOsc.ar(Rand(200, 4000), 0, 0.2).dup }.plot // this is the same UGen
Function-dup evaluates that function multiple times, thus potentially returning distinct UGens.
{ { SinOsc.ar(Rand(200, 4000), 0, 0.2) }.dup }.plot // these are different UGens
Internally used methods
*multiNew(rate, ...args)
*multiNewList([rate, ...args])
These methods are responsible for multichannel expansion. They call *new1(rate, ...args) for each parallel combination. Most *ar/*kr methods delegate to multiNewList.
*new1(rate, ...args)
This method returns a single instance of the UGen, not multichannel expanded. It is called inside multiNewList, whenever a new single instance is needed.
*methodSelectorForRate(rate)
methodSelectorForRate(rate)
Returns an appropriate message selector (Symbol like \ar, \kr, \ir) for a given rate like \audio, \control, \scalar.
*replaceZeroesWithSilence(array)
Returns a new array, where every zero is replaced by a Silent UGen. This is required internally sometimes for UGens like Out.
init(... theInputs)
By default, this method stores the inputs (e.g. the arguments to *ar and *kr) in the UGen. This may be overridden to do other initialisations, as long as the inputs are set correctly.